The Meaning of Gemstone

A gemstone may be a rock, mineral, or even a petrified material that’s cut and polished to be used for making jewelry pieces. It may be even harvested like pearls or organic like amber, just as long as it has aesthetic appeal. In the old days, precious gemstones only referred to the Big Three: emeralds, sapphires, and rubies. Everything else was labeled as semi-precious gemstones.

Categories today, however, have been thankfully changed and widened to avoid further confusion.

The Ins and Outs of Lapidary

Lapidary refers to the process of cutting and polishing gemstones. Rough materials are left uncut and unpolished. Cobbed materials are referred to as fractured. Materials like silicon carbide and diamond, due to their hardness, are used for cutting gemstones in a progressive abrasion process. Compounds like aluminum and chromium oxide are, on the other hand, used for polishing gemstones.

Common cutting techniques include tumbling, drilling, polishing, lapping, sanding, grinding, and sawing. Cut gemstones are then polished into several forms such as sculptures, intaglios, cameos, mosaics, intarsias, inlays, spheres, beads, cabochons, and faceted stones.

Sawing The main tool used in sawing is a copper or steel blade with diamond grit on the edges. Water or oil is used to eliminate cutting debris and prevent the blade and stone from overheating.

Grinding Diamond-impregnated grinding wheels made of silicon carbide are used to grind gemstones and shape them into a pre-form. Liquid substance is also used to prevent both the stone and tool from overheating.

Sanding This process is similar to grinding but utilizes finer abrasives instead. It is often performed as a follow-up after grinding for removing scratches caused by the previous cutting technique. For round gemstones, a belt sander may be used in accompaniment to ensure smoother and rounder curves.

Lapping A lap, which is a flat disk that’s either vibrating or rotating, is used to create flat surfaces rather than round ones. The process however is similar to sanding and grinding.

Drilling This technique is used if the lapidarist wishes to create a hole through or in a gemstone. Drilling tools may be rotating or ultrasonic.

Tumbling A gemstone that’s placed in a rotating barrel filled with water and abrasives is tumbled for polishing. These gemstones are usually roughly shaped and the polishing process is gradual and performed with interval washings. Sometimes, vibratory machines are used in lieu of rotating barrels. This time, the barrels vibrate rather than rotate. Tumbling techniques are also used to polish metal jewelry pieces.

Cabochons Cabbing or cabochon cutting is achieved by gluing or dopping the gemstone into a metal or wooden dopstick or simply holding it in place. The cabbing machine then twirls and creates a round smooth surface top and a flat or slightly rounded bottom for the gemstone. This is usually an alternative to faceting for gemstones that possess too many inclusions.

Faceted Stones Gemstones that have faceted forms reflect brilliant color and clarity from all sides and at all light levels. This technique is most suitable for transparent stones. Today, new techniques like grooves and concave facets are used to create new looks for faceted gemstones.

The Importance of Cut and Polish in Gemstones

Cut is one of the all-important 4C’s and which is used not only to appraise diamonds but gemstones in general as well. Gemstones are often cut with regard to their size alone. But beautifully cut gemstones take their color into consideration as well.

If you are shopping for faceted gemstones, one way of determining the excellence of its cut is to check if its able to reflect light on a consistent level throughout its surface. Look for symmetrical rather than asymmetrical cuts as well. Lastly, be reminded that cut is different from shape.

Polish is simply like adding the final touches to a gemstone. A well-polished gemstone is one with evenly smooth gloss and with no visible scratches on its surface.

Carat Weight versus Size

Diamonds and colored gemstones alike are evaluated and appraised according to the 4C’s which are made up by cut, color, clarity, and carat weight. Carat weight is very much different from size and definitely more important than the latter. Also, take note that carat is different from karat, which is the measurement unit used for gold. Carat weight uses the abbreviation ct and ct TW for carat total weight.

In the past, carob seeds were traditionally used to measure a gemstones weight because of its uniform shape and size. In 1913, however, the jewelry industry managed to set universal standards for measurement and the carat weight system was born.

Now, one carat is always equivalent to one-fifth or twenty percent of one gram. One carat is made up of one hundred points. As a gemstones weight goes up, so does its value or price per carat.

The way carat weight is discussed is occasionally a cause for confusion. Remember that a gemstone with .005 ct may be called a half point gemstone. A .25 ct gemstone could be called a quarter carat while a .50 carat gemstone may be referred to as a half carat or fifty points.

Gemstones are often listed according to their size because it is more uniform than carat weight. Two different gemstones may have the same size but different carat weights and consequently, different prices as well.

Factors Affecting Gemstone Carat Weight

Gemstone Material - A 1 carat ruby is smaller than a 1 carat emerald. This is mainly due to the gemstones specific gravity. A gemstones denseness level can make it carry greater weight even though it has a smaller size than other gemstones with the same carat weight. While carat weight is very much important for traditional and much-prized gemstones, it tends to lose its significance when it comes to common gemstones with high supplies like blue topaz, citrine, and amethyst. Amethyst, in fact, used to be classified as one of the precious stones but its price went down when loads of shipment arrived from Brazil in the 19th century.

Gem Shape or Cut - The shape and cut can occasionally affect the carat weight. While most jewelry designers cut gemstones with size and carat weight in mind, others place more importance on its aesthetic value and may therefore reduce carat weight and size in favor of improved looks. The same can be said for shape as well.

Table Diameter – The table diameter is often considered important only for measuring or evaluating the brilliance of a given gemstone, but what few people realize is that it can affect the gemstones carat weight as well.

Similar to gem cut and shape, if the table diameter is shaped in such a way to maximize its window-like characteristics, carat weight might be consequently sacrificed.

Today, studies show that a lot of gemstones sold on the market are cut to take commercial concerns into consideration. Many of these gemstones report loss in weight of just 10% or lower. Some are even cut to the extent of making them appear bigger as well.

Girdle Thickness – The girdle is the dividing line between a gemstones pavilion and crown or its bottom and top facets. Ideally speaking, girdles must be extremely thin and preferably visible only to the naked eye like a light line. Thick girdles not only reduce brilliance and light yield but negatively affect the gemstones color as well. Girdles are often referred to as edges and they are graded as any of the following: very thin, thin, medium, thick, thick, and very thick. Thin girdles look better, but they’re lighter in weight and easier to chip.

Crown Height – The crown of a gemstone refers to its upper area and positioned on top of the girdle. Acceptable crown height for gemstones is between 11.0 to 16.2% of the girdle diameter. Greater crown height often means greater carat weight.

Pavilion Bulge – The pavilion is the bottom portion of a faceted gemstone. Greater bulge usually means heavier carat weight.

Culet Size – This is the facet at a gemstones tip. Like the girdle, culets are better invisible to the naked eye. It may be sharp or pointed.

]]> http://knowingjewelry.com/understanding-how-gemstones-are-weighed-and-measured.html/feed 0 http://knowingjewelry.com/understanding-the-clarity-and-transparency-of-gemstones-crystal-clear.html http://knowingjewelry.com/understanding-the-clarity-and-transparency-of-gemstones-crystal-clear.html#comments Wed, 14 Jan 2009 17:41:59 +0000 MS Prasaja http://knowingjewelry.com/?p=114 Clarity, together with cut, color, and carat weight, is one of the four important C’s used for evaluating and appraising gemstones. Gemstones clarity determines the level of flawlessness of a given gemstone. With great clarity comes great transparency as well. Transparency determines the ability of light to pass through a gemstone and inclusions, which are a no-no in judging quality, can also hinder transparency. Use the following tips to help you evaluate the clarity and transparency of gemstones.

How to Evaluate Clarity in a Gemstone

Clarity assesses and grades the external and internal characteristics of a given gemstone. Inclusions such as feathers and crystals are examples of internal flaws. They originate from within but may extend to the surface. Blemishes such as scratches and nicks are examples of external flaws.

Blemishes are generally quite small and only appear on the surface of gemstones. Feathers are cracks or fissures within a gemstone. Crystals are minerals trapped inside gemstones. Inclusions carry greater weight in diamonds than other colored gemstones. While they are expected to occur in certain gemstones like red tourmaline and emerald, inclusions hardly occur in gemstones like aquamarine and citrine.

At times, inclusions and blemishes occur due to the cutting technique utilized. Also, inclusions, at times, increase the value of a gemstone. This is true in the cases of eye in cats eye and stars in rubies and sapphires.

Upon assessing the number, color, nature, location, and size of these flaws, an authorized individual will then grade the clarity of the gemstone in a scale of 0 to 10.

Unlike cut, clarity definitely affects the prices of gemstones.

Types of Gemstones according to Clarity

Type 1 These gemstones are free from inclusions most of the time. They include but aren’t limited to yellow beryl, blue topaz, and amethyst. Their grades range from VVS to I.

Type 2 These gemstones generally possess inclusions. They include but aren’t limited to sapphires, rubies, and alexandrite. Their grades range from VVS to I as well.

Type 3 These gemstones are rarely without inclusions. They include but aren’t limited to red tourmaline and emeralds. Their grades range from VVS to I1.

Factors Affecting Inclusions in Gemstones

Size Minute and minor inclusions are small in size and hardly visible. Obvious inclusions are easily observable. Prominent includes are hard to miss at all.

Contrast Also known as color or relief, contrast refers to the difference between a gem and included crystal. Inclusions, based on their contrast levels, may be barely noticeable or a distraction.

Number Inclusions may appear individually or in clusters and clouds. Keep in mind however that the degree of distraction carries more weight than the number of inclusions present.

Location Inclusions located at the center of a gemstone or under the table are less desirable than those occurring near the girdle.

Grading System for Gemstone Clarity

VVS 1 and 2 Eye-Clean and Extra Fine - Something more than 10x magnification eyepiece is necessary just to make the inclusions in a gemstone visible.

VS 1 and 2 Slightly Included and Fine Quality - Tiny pin-prick inclusions are visible under careful scrutiny but their presence doesn’t affect the overall appearance of the gemstone.

S1 Moderately Included and Good Quality - Although the inclusions of this ilk are easier to see, they still don’t detract too much from the overall appearance of the gemstone.

S2 Moderately Included and Good to Medium-High Quality - When held closer than arms length, the gemstone will show inclusions that are easily visible.

Included 1, 2, and 3; Heavily to Severely Included and Low to Medium Quality – Inclusions here are either highly visible or worse, they virtually draw attention to themselves.

Levels of Transparency in a Gemstone

Transparent gemstones are those which you can see right through them. Their internal features are clear and defined. Semi-transparent gemstones on the other hand may appear a bit hazy and blurry. Not all of its internal features may appear distinct.

The internal characteristics of translucent gemstones are vague and not that easy to see. Semi-translucent or semi-opaque gemstones, on the other hand, simply provide even greater challenge for the individual to see through it.

Lastly, opaque gemstones don’t show its internal characteristics at all.

When evaluating the transparency and clarity of a gemstone, make sure to clean it first as dirt and oil can reduce transparency. Use a microscope if possible. Lastly, loose gemstones are easier to evaluate because settings can conceal inclusions located at the gemstones pavilion.

]]> http://knowingjewelry.com/understanding-the-clarity-and-transparency-of-gemstones-crystal-clear.html/feed 0 http://knowingjewelry.com/knowing-the-different-cuts-for-gemstones.html http://knowingjewelry.com/knowing-the-different-cuts-for-gemstones.html#comments Thu, 06 Nov 2008 05:47:39 +0000 MS Prasaja http://knowingjewelry.com/?p=64 When grading and appraising gemstones, cut may not be as influential as the other C’s like color, clarity, and carat weight, but it is definitely an influencing factor when it comes to the gemstones overall beauty. To properly evaluate the cut of a given gemstone, you must not only study its face-up view or the surface or top view but study it from all other angles as well. An excellent cut can reduce loss on carat weight but enhance its looks to breathtaking proportions at the same time.

Common Cuts Used on Gemstones

Brilliant Cuts A brilliant-cut gemstone usually has three flat polished surfaces per facet. They are positioned in such a way to radiate the best light from the gemstone. Gemstone cutters also make sure that the angles will enhance the brilliance of the gemstone. Brilliant cuts are mostly used for diamonds and transparent gemstones.

Some facets will have one or more shapes like stars, hearts, kites, and lozenges. Variations of the brilliant cut include the naivet‚ or boat-shaped marquise, per-shaped pendeloque, and oval shape. Oval shapes are suitable for gemstones with lower carat weight because they can make them appear bigger.

The most popular variation of all is the full-cut round brilliant. It has fifty-eight facets, presently the greatest count for brilliant cut gemstones. The single brilliant cut, on the other hand, has seventeen to eighteen facets. For gemstones used in earrings and pendants, the briolette variation is mostly used to provide it with circular cross-section teardrop shapes. Brilliant cuts with triangular dimensions are called trilliants while square brilliant cuts are also known as princess cuts.

Step Cuts Another popular cut for a gemstone is the step or trap cut. Step cuts are best used for colored gemstones because they possess four-sided table facets and girdles as well as parallel quadrilateral facets. The term step cut was used because this gemstone cut bears similarities with a staircase. Step cuts have fewer facets than brilliant cuts.

One well-known variation of a step cut is the baguette. It is rectangular in shape but with square corners. Emerald cuts are also quite popular. Its name was derived from its consistent use with emeralds. Emerald cuts remove the corners and form an octagonal shape. Clipping off the corners protect delicate gemstones like emeralds and facilitate setting of gemstones at the same time. Other popular variations for step cuts are window, table, radiant, and oval.

The best advantage of step cuts is its ability to enhance a gemstones color, making the color richer and appearing to have originated straight form the belly of the gemstone.

Mixed Cuts Mixed cuts for gemstones are mostly combinations of brilliant and step cuts. The crown or top portion of a gemstone will resemble a brilliant cut while the pavilion or bottom portion of a gemstone will receive a step cut. At times, the two cuts will appear side by side. Mixed cuts are also characterized by their rounded outlines. Many transparent gemstones like rubies and sapphires are often cut this way. Gemstones with mixed cuts are also commonly set in prongs.

Variations for mixed cuts include but are not limited to cushion, zircut, pear or teardrop, and oval.

Cabochon Cuts A gemstone with a cabochon cut will appear rounded on top and flat on the bottom. At times, gemstones will only appear in this cut. Height of a gemstones dome with a cabochon cut varies. The name is derived from the French term used for bald heads. Cabochon cuts are simplest to make, and that’s why you’ll often see them used on affordable gemstones and those that will not benefit from faceting.

Fancy Cuts Any other cut besides those mentioned above is usually referred to as fancy. A checkerboard cut, for instance, will have a combination of a large table facet on top and a mixed cut. A rose cut will have a round girdle outline, flat base, dome-shaped crown, and facets of a brilliant cut.

When judging the cut of a gemstone, start by evaluating it face up. See if the gemstone shows uniform color distribution and radiates light in the best possible way. Gemstones cut with large windows are unappealing. Lastly, recheck all other angles and determine if the cut took both carat weight and looks into consideration.

]]> http://knowingjewelry.com/knowing-the-different-cuts-for-gemstones.html/feed 11 http://knowingjewelry.com/the-gem-stone-mining-and-making-process.html http://knowingjewelry.com/the-gem-stone-mining-and-making-process.html#comments Thu, 16 Oct 2008 05:36:07 +0000 MS Prasaja http://knowingjewelry.com/?p=43 So you’re wondering how exactly your jewelry came to be. Well, that’s a normal question any jewelry enthusiast would ask. You do question how these gems are placed into metal. You also question where exactly these gems came from.

There are gem stone mines everywhere around the world. The most popular are in Brazil, Canada, Mexico, Uruguay and Africa. There are also mines in Europe and the United States, depending on what kind of gem stone you are looking for.

Amethyst

Amethyst is the most valuable kind of quartz. It is found everywhere around the world. For this very reason, it is one of the most affordable. The quality of amethyst is quite unique, depending on where it was obtained. Amethyst that are found in the United States are larger compared to those found in Africa. However, the latter has higher saturation when it comes to their colors.

Amethysts with the highest saturation are those found in Australia. There are also amethyst found in Brazil are usually large and have hues and cuts.

Emerald

Emeralds are mostly found in Mexico. Two main sources are the mines in Guerrero and Vera Cruz. Emeralds found there have the tendency to have lighter shades and are clearer than those found in other countries. The stones have lighter hues and the crystals are phantomed with a transparent interior and a saturated exterior.

Emeralds that are found in Guerrero are saturated dark green. They have a visible termination of their interior color saturation and exterior transparency. The highly saturated emeralds are the most elegant.

Sapphire

The most notable source of Sapphires are those found in Brazil from Minas Gerais, Bahia, Maraba and Rio Grande do Sul. Among those containing the best sapphires are the large pockets that are formed by the volcanic material.

The sapphires that are produced here vary in their color saturation which ranging from pale up to medium blue. Those that are navy blue are the sapphires that have the highest saturation.

Diamond

Africa is known to be a producer of diamonds, thus the inspiration of the recently released blood diamond. There are diamond deposits in Zambia and Namibia. The diamonds found in Africa can be as large as an egg and are outstandingly clear.

Jade

The United States has various gems. In Maine, North Carolina, Pennsylvania, Montana and Colorado, the most popular stone is the Jade. The color depends from the medium saturation. It may be smoky or translucent, depending on where it was obtained.

Jade from Maine and North Carolina are usually dark while those found in Montana or Colorado have a green tint.

Now, the next question, how are the jewelry made? Diamonds, emeralds, sapphires, amethysts, and jade are only a handful of precious gemstones out there. Some of them are very valuable because of their rare appearance.

How are these gemstones formed? Well, they are formed underneath the Earth. The process involves vary in each gem stone. The stones react with the minerals, specifically water. This is how they are dissolved. When the solution evaporates and cools down, these minerals are formed.

The water then mixes with the silica-rich rocks like sandstone. This produces the gemstones like amethyst, opals, agates, sapphires, jade and topaz to name a few. When the copper-rich rocks mix with the water, it bears the minerals like turquoise, malachite and azurite.

Emeralds and tourmalines are formed from rain water or the water that is from cooling bodies like magma that is mixed with the minerals and crystallized in cavities or open cracks. These spaces are filled with minerals which create the hydrothermal deposits needed in the formation of these gem stones.

There are also gemstones that are formed directly from the mantle. They consist up to 70% of Earths total mass. They are usually made up of magnesium, silicon, iron, oxygen, silicate and aluminum compounds. The upper layer of the Earths mantle has a volume of the olivine which is quite common in the whole procedure.

Whenever you hear the word metamorphic it means the change of form of these rocks. Metamorphic gems are garnet, emerald, ruby, aquamarine, sapphire, onyx and zircon. They are formed over a long period of time because they wait for the rocks to be altered with such pressure and intense heat in order to interact with the other solutions.

]]> http://knowingjewelry.com/the-gem-stone-mining-and-making-process.html/feed 0